|
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: The middle of the disc is fixed and by assembling a STIR-UP
pin into the fixed place in the middle of the disc it has stir-up(
130°,90°,90°,90°,130°) bending capacity between 7.000 and 10.000 times
in normal working hours..Working speed is not slow as the other bending
machines and it has 14 revolution in 1minutes capacity,so it has two
times bending capacity when compared the other bending machines.
It is the best solution for the stir-up bending type which is the most
time wasting and hardest type among all the bending types in the working
sites.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: Bending capacity is from 2mm to 22mm
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE is processed both on right and left sides via switch on
the control board besides has capacity of working both manual and
automatic.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: Due to being only 120kgs can be easily carried in the
building zones and even in the intermediate floors.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: Despite having small measurements the working capacity
is satisfactory according to users and QC feedbacks.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: STIR-UP bending type(130° / 90° / 90° /90° /
130°),spiral bending type and 45º / 90º / 180º bending types are
continuously processed.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: With only one button STIR-UP bending type(130° / 90° /
90° /90° / 130°) is continuously processed till you deactivate the
bending.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: Works both electrical motor with 380Volt and also can be
changed with another Volt application according to demands.
Electronically automation section processes with 24 Volt and is
protected against to all environmental effects. It can go on processing
in all weather conditions.
DCK-22 BDS SPECIAL AUTOMATIC STIR-UP BENDING
MACHINE: The after sales service can be maintained easily by the
operator.
WARRANTY: Warranty duration is 2 years
against to manufacturing defects.
All of the products are certified according to international TS EN ISO
9001: 2000, OHSAS 18001:1999 and CE standards.
|
TECHNICAL DETAILS OF DCK-22 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE
|
ELECTRICAL BENDING CAPACITY |
1.1 KW / 2 HP |
|
ENGINE SPEED |
1.500 / 14 Rpm |
|
BENDING CAPACITY |
Ø 22 mm |
|
LENGHT |
66 cm |
|
WIDHT |
51 cm |
|
HEIGHT |
82 cm |
|
WEIGHT |
120 Kgs |
|
 |
DCK-22 BDS SPECIAL
AUTOMATIC STIR-UP BENDING MACHINE BENDING CAPACITY
|
|
The Bar In mm² |
|
Quantity Of Bar |
45 kgs/mm² |
QUANTITY OF BAR |
45 kgs/mm² |
|
1 |
Ǿ 22 |
Ǿ 20 |
Ǿ 18 |
|
2 |
Ǿ 20 |
Ǿ 18 |
Ǿ 16 |
|
3 |
Ǿ 16 |
Ǿ 14 |
Ǿ 12 |
|
4 |
Ǿ 14 |
Ǿ 12 |
Ǿ 8 |
|
5 |
Ǿ
10 |
Ǿ 8 |
Ǿ 6 |
|
6 |
Ǿ 8 |
Ǿ 6 |
Ǿ
-- |
|
7 |
Ǿ 6 |
Ǿ
-- |
Ǿ
-- |
|
