|
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP BENDING MACHINE
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: The middle of the
disc is fixed and by assembling a STIR-UP pin into the fixed
place in the middle of the disc it has stir-up(
130°,90°,90°,90°,130°) bending capacity between 7.000 and 10.000
times in normal working hours. It is the best solution for the
stir-up bending type which is the most time wasting and hardest
type among all the bending types in the working sites.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: Bending capacity
is from 2mm to 36mm.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE is processed both
on right and left sides via switch on the control board besides
has capacity of working both manual and automatic.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: Due to being only
350kgs can be easily carried in the building zones and even in
the intermediate floors.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: STIR-UP bending
type(130° / 90° / 90° /90° / 130°),spiral bending type and 45º /
90º / 180º bending types are continuously processed.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: With only one
button STIR-UP bending type(130° / 90° / 90° /90° / 130°) is
continuously processed till you deactivate the bending.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: Works both
electrical motor with 380Volt and also can be changed with
another Volt application according to demands. Electronically
automation section processes with 24 Volt and is protected
against to all environmental effects. It can go on processing in
all weather conditions.
DCK-36 BDS SPECIAL AUTOMATIC STIR-UP
BENDING MACHINE: The after sales
service can be maintained easily by the operator.
WARRANTY:
Warranty duration is 2 years against to manufacturing defects.
All of the products are certified according to international TS
EN ISO 9001: 2000, OHSAS 18001:1999 and CE standards
|
