|
DCK-52
MANUAL BAR BENDING MACHINE:Bending capacity from 2mm to 56mm
DCK-52 MANUAL BAR BENDING MACHINE is
processed both on right and left sides via switch on the control board
besides has capacity of working both manual and automatically.
DCK-52 MANUAL BAR BENDING MACHINE: Due to
being only 550kgs can be easily carried in the building yards and even
in the intermediate floors.
DCK-52 MANUAL BAR BENDING MACHINE: Stir-up
bending type(130° / 90° / 90° /90° / 130°),spiral bending type and other
bending types are continuously processed.
DCK-52 MANUAL BAR BENDING MACHINE :
Processes 45º / 90º / 180º bending types easily by sliding the switch to
the left and right side.
DCK-52 MANUAL BAR BENDING MACHINE:Despite
having small measurements the working capacity is satisfactory according
to users and QC feedbacks.
DCK-52 MANUAL BAR BENDING MACHINE: Works
both electrical motor with 380Volt and also can be changed with
110Volt/220Volt/415Volt/440Volt according to demands. Electronically
automation section processes with 24 Volt and is protected against to
all environmental effects. It can go on processing in all weather
conditions.
DCK-52 MANUAL BAR BENDING MACHINE: The
maintenance after sales service can be done easily by the operator.
WARRANTY: Warranty duration is 2 years
against to manufacturing defects.
All of the products are certified according to international TS EN ISO
9001: 2000, OHSAS 18001:1999 and CE standards.
|
TECHNICAL DETAILS OF DCK-52 MANUAL BAR BENDING MACHINE
|
Electrical Engine Power |
9 KW / 12 HP |
|
Engine Speed |
1.500 / 9 Rpm |
|
Bending Capacity |
Ø 56 mm |
|
Lenght |
110 cm |
|
Width |
80 cm |
|
Height |
100 cm |
|
Weight |
550 Kg |
|
 |
DCK-52 MANUAL BAR BENDING MACHINE
BENDING CAPACITY
|
|
The
Bar In mm² |
|
Quantity Of Bar |
45 Kgs/mm² |
65 Kgs/mm² |
85 Kgs/mm² |
|
1 |
• Ø56 |
• Ø52 |
• Ø46 |
|
2 |
• Ø32 |
• Ø30 |
• Ø28 |
|
3 |
• Ø30 |
• Ø28 |
• Ø26 |
|
4 |
• Ø26 |
• Ø24 |
• Ø20 |
|
