|
DCK-60 MANUAL BAR BENDING MACHINE:Bending
capacity is from 2mm to 60mm.
DCK-60 MANUAL BAR BENDING MACHINE is
processed both on right and left sides via switch on the control board
besides has capacity of working both manual and automatically.
DCK-60 MANUAL BAR BENDING MACHINE: Due to
being only 650kgs can be easily carried in the building yards and even
in the intermediate floors.
DCK-60 MANUAL BAR BENDING MACHINE:
Processes 45º / 90º / 180º bending types easily by sliding the switch to
the left and right side.
DCK-60 MANUAL BAR BENDING MACHINE:Despite
having small measurements the working capacity is satisfactory according
to users and QC feedbacks.
DCK-60 MANUAL BAR BENDING MACHINE Works
both electrical motor with 380Volt and also can be changed with
110Volt/220Volt/415Volt/440Volt according to demands. Electronically
automation section processes with 24 Volt and is protected against to
all environmental effects. It can go on processing in all weather
conditions.
DCK-60 MANUAL BAR BENDING MACHINE: The
maintenance after sales service can be done easily by the operator.
WARRANTY: Warranty duration is 2 years
against to manufacturing defects.
All of the products are certified according to international TS EN ISO
9001: 2000, OHSAS 18001:1999 and CE standards.
|
TECHNICAL DETAILS OF DCK-60 MANUAL BAR BENDING MACHINE
|
Electrical Engine Power |
11 KW/ 15 HP |
|
Engine Speed |
1.500 / 9 Rpm |
|
Bending Capacity |
Ø 60 mm |
|
Lenght
|
120 cm |
|
Width |
90 cm |
|
Height |
110 cm |
|
Weight |
650 Kgs |
|
 |
DCK-60
MANUAL BAR BENDING MACHINE BENDING CAPACITY
|
|
The
Bar In mm² |
|
Quantity Of Bar |
45 kgs/mm² |
65 kgs/mm² |
85 kgs/mm² |
|
1 |
• Ø60 |
• Ø60 |
• Ø52 |
|
2 |
• Ø36 |
• Ø32 |
• Ø30 |
|
3 |
• Ø32 |
• Ø28 |
• Ø26 |
|
4 |
• Ø28 |
• Ø26 |
• Ø22 |
|
